CERAN® HOT PLATES
CERAN® - is an extraordinary glass ceramic - highly resistant to breakage and temperature changes, will not distort, permeable to ultra-violet light and also highly acid-resistant.
Construction: the low-mass CERAN® plate is electrically heated over its full surface, and is embedded into a high-grade, stainless steel frame which is mounted on an internally insulated stainless steel housing.
The temperature control system is regulated by an electronic NiCr-Ni temperature sensor (regulation range between 50 and 500°C). The controller is built into a pressure-cast aluminium casing. The heating time for 500°C is approximately 8 minutes.
Four feet, which can be individually adjusted to an approximate height of 8 mm, ensure a wobble-free, horizontal stability.
Type 4 SR is also equipped with 4 retort rod sockets (situated 100 mm from each other).
|Series SR - with separate controller|
|Type||Watt||Volt||B x H xT (mm)||CERAN® mm||Weight|
|4 SR||1500||230 V AC||440 x 100 x 180||430 x 140||5,0 kg|
|11 SR||2000||230 V AC||290 x 100 x 290||280 x 280||5,5 kg|
|22 SR||3000||230 V AC||290 x 100 x 440||280 x 430||6,5 kg|
|33 SR||4400||3x400 V, N+PE||440 x 100 x 440||430 x 430||9,0 kg|
|44 SR||5700||3x400 V, N+PE||590 x 100 x 440||580 x 430||11,5 kg|
|Cable length between Controller and Hotplate - 1,3 m. Longer connections are available at extra cost.|